Adhesive mortar and joint colour

For each Elabrick Brick slip, a matching Elabrick Adhesive mortar is available. This ready-to-use mortar ensures perfect adhesion while also defining the colour of the joints, making additional pointing unnecessary. Approximately 2.5 kg of adhesive is required per m². Once cured, the adhesive forms a single layer with the brick slip.

Elabrick adhesive mortar is available in 5 kg and 15 kg buckets. Detailed product information can be found in the Technical Data Sheet and the Safety Data Sheet.

Adhesive & joint colour: White

Adhesive & joint colour: Sand grey

Adhesive & joint colour: Brown

Adhesive & joint colour: Light grey

Adhesive & joint colour: Stone grey

Adhesive & joint colour: Cement grey

Adhesive & joint colour: Quartz grey

Adhesive & joint colour: Anthracite

Adhesive & joint colour: Graphite

Primer

To achieve the best results, we recommend applying Elabrick Primer as a first coat. Application of the ready-to-use primer can be done easily with a block brush or coat roller. The primer should dry for 24 hours before the Elabricks can be applied. For 1 m² you need approximately 0.25 kg of primer.

The Elabrick Primer is available in a 5 kg bucket. Detailed product information can be found in the Technical Data Sheet and the Safety Data Sheet.

Elabrick Primer